Finishing your system right:
Proper plumbing and proper hoses are very important to cooling. We strongly recommend our hose line kit, radiator installation kit, and expansion tank kit. When using our line kit you will need an air bleed ﬁtting in your water pump, or new for 2016, a #4 hose from the water pump. (Page 18)
To ﬁnish off your cooling system you will need a recovery tank. A recovery tank is no longer just a catch can It is a very important part of the cooling system. We have increased our methods to relieve all the air from the system. Air in the system will create heat. (Page 8)
Here at Art's we are constantly working with our customer to have the most efﬁcient cooling system available.
Components of a complete cooling system: Radiator, Fan Shroud, Core Saver, Blow Gun, Radiator Cap, Pressure Checker, Hose line kits, Radiator install kit, Expansion tank install kit, Air bleed ﬁtting and a Recovery Tank
Cooling System Filling
1. Remove radiator cap & open air bleeds
2. Remove blue plug on top upper left of the radiator
3. Fill the system through the port in the radiator. Close all air bleed as it ﬁlls *(Top of water pump)
4. Once the radiator is full reinstall the blue plug
5. Continue to ﬁll the system through the radiator cap till full
6. Start engine & hold RPM to 1500, any trapped air will work itself out
7. Install the cap & ﬁll the recovery tank 1/3 full
8. When hot the recovery tank will be full, as it cools off it will recede, THAT'S IT!